Giỏ Hàng

EnglishVietnamese

Loa hộp JBL Control 25 – 1

Nổi BậtFree

Loa hộp JBL Control 25 – 1

Loa hộp JBL Control 25

  • Thương hiệu: JBL
  • Đến từ: USA
  • Loa có 2 màu trắng và đen
  • Bảo hành: 12 tháng
  • Hàng nhập khẩu, GIÁ BÁN thay đổi theo tỷ giá ngoại tệ. Liên hệ trực tiếp để có giá tốt nhất.
Chia sẻ tới:

Mô tả

Loa hộp JBL Control 25 là Loa nền / tiền cảnh trong nhà / ngoài trời siêu nhỏ gọn
Control 25-1 là loa 3 ”hai chiều với đặc tính âm thanh phong phú, độ phủ rộng, độ phân tán phù hợp, khả năng lắp linh hoạt và kiểu dáng thiết kế cao cấp hiện đại phù hợp với nhiều kiểu dáng. Điều này làm cho Control 23-1 trở thành sự lựa chọn tuyệt vời cho nhiều ứng dụng, bao gồm cửa hàng bán lẻ, nhà hàng, câu lạc bộ sức khỏe, công viên giải trí, cơ sở giáo dục, khách sạn, quán cà phê âm nhạc, địa điểm giải trí và bất cứ nơi nào có tiền cảnh trong nhà / ngoài trời nhỏ gọn chất lượng hàng đầu / nhạc nền (và / hoặc phân trang) loa là bắt buộc.

Đặc trưng loa hộp JBL Control 25

Các thành phần:

• Loa trầm 5 ¼ ”với nón sợi thủy tinh dệt
• Loa tweeter màng PEI 3/4 ”với làm mát bằng chất lỏng

  • Thiết kế hiện đại, cao cấp
  • Phần cứng gắn InvisiBall® tích hợp *, cùng với khung chữ U có sẵn
  • Vỏ bọc và đầu dò chống chịu thời tiết
  • Rộng 100 ° x 100 ° bao phủ
  • Xử lý công suất 100 Watt (chương trình 200 Watt) ở cài đặt 8Ω trực tiếp, cộng với biến áp đa vòi 30 Watt 70V / 100V tích hợp sẵn.
  • Đặc điểm âm thanh có độ trung thực cao với tần số đáp ứng rộng từ 60 Hz – 20 kHz.z.

Ultra-Compact Indoor/Outdoor Background/Foreground Speaker

The Control® 23-1 is a two-way 3” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required.

Features

  • Components:
    • 5-¼” woofer with woven fiberglass cone
    • 3/4” PEI diaphragm tweeter with fluid cooling
  • Contemporary, high-design appearance
  • Built-in InvisiBall® mounting hardware*, plus available U-bracket
  • Weather resistant enclosure and transducers
  • Wide 100° x 100° coverage
  • 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
  • High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

Xem thêm thông tin chính hãng ( tại đây ).

Tham khảo thêm các dòng loa âm trần – loa hộp khác tại Hoàng Phát AV

Thông số kĩ thuật

Frequency Range (-10dB) 60 Hz to 20 kHz
Frequency Response (±3 dB) 85Hz – 17 kHz
Power Rating 200 W Continuous Program (2 hrs) 100 W (400W peak), Continuous Pink Noise (2 hrs) 75 W (300W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL (1m) 110 dB ave. Continuous Pink Noise (116 dB peak)
Sensitivity 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)
Coverage Angle 100° x 100°
Directivity Factor (Q) 6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI) 7.6dB (averaged 1kHz – 16kHz)
Impedance 8 ohms (THRU setting)
Crossover Type 2nd order low-pass, 3rd order high-pass
Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W Insertion Loss <0.94 dB at any tap setting Thru Setting: 8Ω nominal
Recommended ProtectiveHigh-Pass 60 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).
Drivers LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Mounting Hardware InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency ROHS-compliant; Transformer UL Recognized per UL1876
Colors Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D) 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.
Net Weight (each) 3.4 kg (7.5 lbs)
Shipping Weight 8.16 kg (18 lbs) for the pair-pack (for 2 speakers)
Included Accessories InvisiBall™ wall-mounting system), 6 mm x 100 mm hex key
Optional Accessories MTC-25UB-1 – Yolk-type U-bracket (&-WH) MTC-25WMG-1 – WeatherMax grille with backing (&-WH) MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)